A JAE connector is treating one for a machine tool.
The outline
Circularity and waterproof connector of single touch lock mechanism developed for interface of industrial equipment.
JN2 series of reinforcement-type is commercialized by JN1 series of all plastic type and the partial metallic specification, and I agree with miniature and you can use for an electronic machine variously.
JN2-4 extreme types are TUV authorization items.
JAE Connector JN01
[JN1]
* Light-weight connector by all plastics-ization of the body
* kangou where it's easy and certain by one touch lock mechanism of a push twist system
* The crossline specification of the receptacle and the plug is different depending on a series and the number of cores, so would you check it in the general specification of each product? (Socket contact of a plug can choose 10 poles of crossline type of 2 kinds, the pressure arrive and solder.)
Further, 4 peaks of receptacle isn't a body ground. A steel case and chassis earth are needed beforehand.
* 2 kinds by which relay receptacles are relay-type and partition relay-type (4 or 10 poles)
* 3 kinds, straight, light angle and an element (only 10 poles) and the light angle-type can set the cable drawer direction in 4 direction every 90 times for a plug.
* The low profile a light angle plug is kangou height (from steel case face) 30.8mm (4, 10 pole), and by which an element plug is 16.9mm (10 poles)
* Waterproofing of IP67 and the trash performance-proof
* In earthquake resistance and oil resistance, you could excel, vs., environmental performance
* It's possible to install KONJITTO (It can't be installed in the element plug.)
JAE Connector JN02
[JN2]
* A robustness is raised substantially by using part metal for an outer shell with JN1 series and the compatibility (3 times more of breaking strength).
* The used contact arriving at the pressure is common with JN1 series.
* The crossline specification of the receptacle and the plug is different depending on a series and the number of cores, so would you check it in the general specification of each product?
Further, 4 peaks of receptacle is a body ground.
* 4 poles are TUV authorization items.
* A plug is 2 kinds, straight and the light angle. The light angle type can set the cable drawer direction in 4 direction every 90 times.
* Number of poles is 4 poles and 10 poles.
* A light angle plug, kangou height (from steel case face) 31.3mm (4, 10 pole)
* Waterproofing of IP67 and the trash performance-proof
* In earthquake resistance and oil resistance, you could excel, vs., environmental performance
* It's possible to install KONJITTO.
